Closing The Calibration Application; Calibration Process; Process Overview - Kodak PROFESSIONAL ML-500 User Manual

Calibration

Closing the Calibration Application

✔ Click the
at the upper right of the
Configuration screen.
IMPORTANT: If you select Exit from the File menu,
all ML-500 applications close.
Back
Contents

Calibration Process

Process Overview

You can perform the steps separately, as listed
above, or perform all steps at one time by
performing a complete calibration analysis
(see
of the steps in analyzing the target are skipped.
You may need to run more than one calibration
cycle to ensure that the printer's calibration is in
tolerance (see
Next
Index
1. Print a calibration target (see
2. Analyze a calibration target (see
3. Send the LUT to the printer (see
page 86). If you select the latter option, some
page 93).
page 79).
page 80).
page 83).
77