Table of Contents
Advertisement
Charging the handset
To charge your phone, place the handset on the base, making sure that the base is connected to an
AC outlet.
The batteries charging icon
moving when the batteries are charged.
To ensure optimum charging, leave the handset on the charger for at least 15 hours when
using the phone for the first time. During charging, the batteries may heat up. This is quite
normal and perfectly safe.
The handset screen
In standby mode or during use, your phone screen informs you of your phone's
current state through icons, and in particular :
1
Status icons : Indicates your phone's current state.
2
Information field :
•
Standby screen :in the normal state, displays the name of the handset and
the current time.
•
In the menus : displays the selected menu name, function or setting.
3
Action area : displays the actions associated with the multi-function keys
and
in the ongoing menu (refer to section "The multifunction keys ",
page 8).
T
HE ICONS DISPLAYED
DECT signal:
blinks when the handset is out of
range of the base or when the base
is not supplied
Answering machine activated*
New message(s) on your answering
machine.*
Missed (s) call (s) not consulted
Voice(s) message(s) not consulted
Alarm on
Switching the handset on / off
To switch on the handset, give a long press on the key
To switch off the handset, give a long press on the key
displayed. Press the key
Batteries replacement
1
Turn off the handset.
2
Remove the batteries compartment hatch.
3
Remove the old batteries, insert the new batteries one by one the right way as indicated by their
polarities.
moves to inform you that charging is in progress. The icon display stops
to confirm.
1
2
3
Keypad locked
Silent mode activated
Batteries charge condition
Speakerphone enabled
Phone in conversation mode
* model
D350A
.
. The message Switch off Handset? is
7
Handset1
15:29
15/12
Interc
Menu
Set-up...
Advertisement
Table of Contents
