Inserting Batteries - Sony HT-GT1 Operating Instructions Manual

Hide thumbs Also See for HT-GT1:
Table of Contents

Advertisement

 OPT IN (optical input) jack
Use the optical digital cable
(supplied) to connect to the Digital
Out (Optical) jack of a TV when
listening to the TV sound using this
system (page 18).
 FM ANTENNA
Find a location and an orientation
that provide good reception when
you set up the antenna.
Keep the antenna away from the
power cord and the USB cable to
avoid picking up noise.
 Power
Connect the power cord to the wall
outlet.
When the power cord is connected,
the demonstration (page 21)
starts automatically. If you press
 to turn on the system, the
demonstration ends.

Inserting batteries

Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
Notes
Do not mix an old battery with a new
ˎ
one or mix different types of batteries.
If you do not use the remote control
ˎ
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the subwoofer using
the remote control
Point the remote control at the
subwoofer's remote control sensor.
17
GB

Advertisement

Table of Contents
loading

Table of Contents