Specifications - Sony HT-GT1 Operating Instructions Manual

Specifications

Active Subwoofer
(SA-WGT1)
Amplifier section
U.S. model:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION (FTC output
power):
Front L/Front R:
With 3 ohms loads, both channels
driven, from 400 – 10,000 Hz;
rated 32 watts per channel
minimum RMS power, with no
more than 1.0% total harmonic
distortion from 250 milliwatts to
rated output.
Output power (reference):
Front L/Front R:
40 W + 40 W (per channel at 3
ohms, 1 kHz)
Subwoofer:
180 W (at 4 ohms, 100 Hz)
Brazilian model:
Total RMS output power:
200 W
Front L/Front R:
RMS output power:
80 W (40 W per channel × 2, at
3 ohms, 1 kHz, 10% THD*)
Subwoofer:
RMS output power:
120 W (at 4 ohms, 100 Hz, 10%
THD*)
48
GB
Other models:
Power output (rated):
Front L/Front R:
32 W + 32 W (at 3 ohms, 1 kHz, 1%
THD*)
Power output (reference):
Front L/Front R:
40 W + 40 W (per channel at
3 ohms, 1 kHz)
Subwoofer:
180 W (at 4 ohms, 100 Hz)
* Total Harmonic Distortion
Speaker section
Speaker system:
Subwoofer, Bass reflex
Speaker unit:
180 mm (7 1/8 in), cone type
Rated impedance:
4 ohms
Inputs
AUDIO IN/PARTY CHAIN IN L/R:
Voltage 0.8 V, impedance
47 kilohms
OPT IN:
Supported audio signal:
2-channel Linear PCM
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance 1 kilohm
Tuner section
FM stereo, FM superheterodyne tuner
Antenna:
FM lead antenna
Tuning range:
USA and Brazilian models:
87.5 MHz - 108.0 MHz (100 kHz
step)
Other models:
87.5 MHz - 108.0 MHz (50 kHz
step)