Sony HT-GT1 Operating Instructions Manual page 19

When no TV sound is heard from the system
If the message "CODE 01" appears on the display and no TV sound is heard
from the subwoofer and the speaker system, check the following items
and take the corrective actions on the TV.
Check that the speaker output setting is set to use external speakers.
ˎ
Example: KDL-42W800B
1
Press the HOME button on the TV remote control, and then select the
setting item.
2
Select the sound setting item, and then select the speaker setting
item.
3
Select the external speaker output mode.
Check the audio output setting, and if automatic mode is selected,
ˎ
change it to PCM output mode. This system supports 2-channel Linear
PCM formats only.
Example: KDL-42W800B
1
Press the HOME button on the TV remote control, and then select the
setting item.
2
Select the sound setting item, and then select the digital audio output
setting item.
3
Select the PCM output mode.
Note
The information provided above is based on a Sony TV. In case of another TV or
external equipment, check the setting of similar items. For details, refer to the
operating instructions of your TV or external equipment.
19
GB