Sony HT-GT1 Operating Instructions Manual page 28

3
Touch the smartphone to the
N-Mark on the subwoofer until
the smartphone vibrates.
Complete the connection by
following the instructions displayed
on the smartphone.
When the BLUETOOTH connection is
established, the BLUETOOTH
indicator stops flashing and
remains lit. BLUETOOTH device
name appears on the display.
You can switch the sound source
from the smartphone to another
NFC-compatible BLUETOOTH
device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Hint
If pairing and the BLUETOOTH connection
fail, do the following.
 Relaunch "NFC Easy Connect" and
move the smartphone slowly over the
N-Mark.
 Remove the case from the smartphone
if using a commercially available
smartphone case.
28
GB
Listening to music on a
BLUETOOTH device
You can operate a BLUETOOTH
device by connecting the system
and the BLUETOOTH device using
AVRCP.
Check the following before playing
music:
 The BLUETOOTH function of the
BLUETOOTH device is turned on.
 Pairing has been completed.
To play music on an NFC-
incompatible BLUETOOTH device
1
Press BLUETOOTH on the
subwoofer to select the
BLUETOOTH function.
"BT AUDIO" appears on the display.
2
Establish connection with the
BLUETOOTH device.
The last connected BLUETOOTH
device will be connected
automatically.
Perform the BLUETOOTH connection
from the BLUETOOTH device if the
device is not connected.
Once the connection is established,
the BLUETOOTH device name
appears on the display.
3
Press  to start playback.
Depending on the BLUETOOTH
device,
 you may need to press  twice.
 you may need to start playback
of an audio source on the
BLUETOOTH device.