Connecting The Pc - Panasonic KX-TDA30 Getting Started

4.1 Connecting the PC

4.1 Connecting the PC
The Maintenance Console serves as an overall system programming tool for the PBX. The Maintenance
Console's Quick Setup lets you easily configure the PBX to receive intercom and trunk calls, as well as apply
basic settings such as time and date.
To programme the PBX, connect it to the PC with serial interface.
Serial Interface Connection
CAUTION
When connecting a PC to the PBX via the RS-232C port, it is necessary to keep the following in mind to
protect the system:
1.
Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable)/USB
cable are conductive. If they are not conductive, make sure that both connector cases of the cable are
firmly connected.
2.
If this is not possible, connect the frame of the PBX to the frame of the PC using an earthing wire in
order to prevent difference in the electrical potentials.
24 Getting Started
RS-232C Port
USB Port
RS-232C (Cross Cable)
Pin Assignments
RS-232C Port
Pin No.
2
3
4
5
6
7
8
To COM Port
PC
To USB Port
PC
COM Port
Pin No.
2
3
4
5
6
7
8