Repair - MS2 reverse gear and upper gear housing, sailboat drive
Upper bearing housing,
disassembly
9991801
43. Put the bearing housing in tool no. 884723 and
press the gear wheel out. Use tool no. 884733 and
shaft 9991801. Save any shims.
44. Remove the circlip, using circlip pliers.
30
884733
884723
45. Put the bearing housing in tool no. 884723 and
press roller bearing out of the bearing housing. Use
tool no. 884728 and shaft 9991801.
9991801
884723
884728