Special Tools - Volvo Penta MS2 Workshop Manual

884078 884143
884679 884720
884726
884078-7 Extractor. Disassembly of output shaft
884143-9 Shaft for expander 884750.
884161-1 Slide hammer. Removal of propeller shaft
884264-3 Sleeve for vertical shaft. Can be replaced
by 884830
884611-5 Extractor. Used together with 884161
884637-0 Sleeve. Disassembly of tubular shaft
MS2V
884679-2 Drift Installation of seal ring
884720-4 Extractor. Removal of outer bearing race.
Used together with 884761
884721-2 Extractor. Removal of outer bearing race.
Used together with 884761
884723-8 Drift Splitting of rear bearing housing
10

Special tools

884161
884721
884728 884729
884264 884611
884723 884724
884730
884724-6 Hook wrench. Removal, assembly of
nuts.
884725-3 Drift Removal, assembly of retention ring
halves.
884726-1 Expanding mandrel. Removal of outer
bearing race.
884728-7 Drift Removal of bearings, gear wheels.
884729-5 Drift Installation of bearing.
884730-3 Drift Disassembly of output bearing hous-
ing.
884731-1 Drift Installation of bearing.
884732-9 Drift Installation of bearing.
884637
884725
884732
884731