Serial Ata Ports; Sas Ports (X8Dt6/X8Dt6-F Only) - Supermicro X8DT6 User Manual

X8DT6/X8DT6-F/X8DTE/X8DTE-F User's Manual

Serial ATA Ports

Six Serial ATA Ports (I-SATA0~I-
SATA 5) are located on the mother-
board. These ports provide serial-link
signal connections, which are faster
than the connections of Parallel ATA.
See the table on the right for pin
defi nitions.

SAS Ports (X8DT6/X8DT6-F only)

SAS Ports 0~3, 4~7, located at JSM1/
JSM2, provide Serial-Attached SCSI
connections on the X8DT6/X8DT6-F.
See the layout below for SAS port
locations.
Note 1: For more information on SATA HostRAID confi guration, please
refer to the Intel SATA HostRAID User's Guide posted on our website @
http://www.supermicro.com/support/manuals/.
Note 2: For more information on LSI SAS RAID confi guration, please
refer to the LSI MegaRAID User's Guide posted on our website @ http://
www.supermicro.com/support/manuals/.
FAN5
P1-DIMM3A
P1-DIMM3B
FAN6
P1-DIMM2A
P1-DIMM2B
P1-DIMM1A
P1-DIMM1B
CP CPU1
FAN8/
CPU2 Fan
SLOT7 PCI-E 2.0 X8
SLOT6 PCI-E 2.0 X8
JPL1
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
JPL2
SLOT3 PCI-E 2.0 X4
SLOT1 PCI-E X4
USB6/7 USB4/5
JI2C2
JI2C1
JPG1
JPI2C1
JPW2
JPW1
CPU2
P2-DIMM1B
P2-DIMM1A
P2-DIMM2B
P2-DIMM2A
P2-DIMM3B
P2-DIMM3A
X8DT6/E Series
Rev. 2.01
TPM
JP7
JIBTN1
F C
T-SGPIO1
I-SATA5 I-SATA2
E B
T-SGPIO2
I-SATA4 I-SATA1
USB3 USB2
A
D
I-SATA3 I-SATA0
JL1
JWF1 JWD
2-36
Serial ATA
Pin Defi nitions
Pin# Defi nition
1 Ground
2 TX_P
3 TX_N
4 Ground
5 RX_N
6 RX_P
7 Ground
JPW3
FAN1
A. I-SATA0
B. I-SATA1
FAN7
C. I-SATA2
CPU1 Fan
D. I-SATA3
E. I-SATA4
LE1
FAN2
F. I-SATA5
G. SAS 0~3 (X8DT6/
X8DT6-F only)
H. SAS 4~7 (X8DT6/
FAN3
SP1
X8DT6-F only)
LED1
SAS0~3
G
SAS4~7
H
JPS1