Internal Speaker; Power Led/Speaker - Supermicro X8DT6 User Manual

Internal Speaker

The Internal Speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin defi nitions.
Refer to the layout below for the loca-
tions of the Internal Buzzer (SP1).

Power LED/Speaker

On the JD1 header, pins 1-3 are used
for power LED indication, and pins 4-7
are for the speaker. See the table on
the right for speaker pin defi nitions.
Please note that the speaker con-
nector pins (4-7) are for use with an
external speaker. If you wish to use
the onboard speaker, you should close
pins 6-7 with a jumper.
FAN5
P1-DIMM3A
P1-DIMM3B
FAN6
P1-DIMM2A
P1-DIMM2B
P1-DIMM1A
P1-DIMM1B
CPU1 CP
FAN8/
CPU2 Fan
SLOT7 PCI-E 2.0 X8
SLOT6 PCI-E 2.0 X8
JPL1
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
JPL2
SLOT3 PCI-E 2.0 X4
SLOT1 PCI-E X4
USB6/7 USB4/5
JI2C2
JI2C1 JPG1
Pin#
Pin 1
Pin 2
JPI2C1
JPW2
JPW1
CPU2
P2-DIMM1B
P2-DIMM1A
P2-DIMM2B
P2-DIMM2A
P2-DIMM3B
P2-DIMM3A
X8DT6/E Series
Rev. 2.01
TPM
JP7
JIBTN1
T-SGPIO1
I-SATA5 I-SATA2
T-SGPIO2
I-SATA4 I-SATA1
USB3 USB2
I-SATA3
I-SATA0
JL1
JWF1 JWD
2-23
Chapter 2: Installation
Internal Buzzer (SP1)
Pin Defi nition
Defi nitions
Pos. (+) Beep In
Neg. (-) Alarm
Speaker
Speaker Connector
Pin Setting Defi nition
Pins 6-7 Internal Speaker
Pins 4-7 External Speaker
JPW3
FAN1 A. Internal Speaker (Buzz-
er)
FAN7 B. PWR LED/Speaker
CPU1 Fan
LE1
FAN2
B
FAN3
SP1
A
LED1
SAS0~3
SAS4~7
JPS1