Wake-On-Lan; Overheat Led/Fan Fail (Joh1) - Supermicro X8DT6 User Manual

X8DT6/X8DT6-F/X8DTE/X8DTE-F User's Manual

Wake-On-LAN

The Wake-On-LAN header is located
at JWOL on the motherboard. You
must also have a LAN card with a
Wake-On-LAN connector and a cable
to use this feature. See the table on
the right for pin defi nitions.

Overheat LED/Fan Fail (JOH1)

The JOH1 header is used to connect
an LED indicator to provide warnings
of chassis overheating or fan failure.
This LED will blink when a fan failure
occurs. Refer to the table on right for
pin defi nitions.
FAN5
P1-DIMM3A
P1-DIMM3B
FAN6
P1-DIMM2A
P1-DIMM2B
P1-DIMM1A
P1-DIMM1B
CPU1 CP
FAN8/
CPU2 Fan
SLOT7 PCI-E 2.0 X8
SLOT6 PCI-E 2.0 X8
JPL1
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
JPL2
SLOT3 PCI-E 2.0 X4
SLOT1 PCI-E X4
USB6/7 USB4/5
JI2C2
JI2C1 JPG1
Pin#
1
2
State
Solid
Blinking
JPI2C1
JPW2
JPW1
CPU2
P2-DIMM1B
P2-DIMM1A
P2-DIMM2B
P2-DIMM2A
P2-DIMM3B
P2-DIMM3A
X8DT6/E Series
Rev. 2.01
TPM
JP7
JIBTN1
T-SGPIO1
I-SATA5 I-SATA2
T-SGPIO2
I-SATA4 I-SATA1
USB3 USB2
I-SATA3
I-SATA0
JL1
JWF1 JWD
2-24
Wake-On-LAN
Pin Defi nitions
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
Overheat LED
Pin Defi nitions
Defi nition
5vDC
OH Active
OH/Fan Fail LED
Pin Defi nitions
Message
Overheat
Fan Fail
A. Wake-On-LAN
B. Overheat/Fan Fail
JPW3
FAN1
LED
FAN7
CPU1 Fan
LE1
FAN2
B
FAN3
SP1
LED1
SAS0~3
SAS4~7
A
JPS1