Bridge Mode; Access Control - D-Link DAP-1665 User Manual

Section 3 - Configuration
Mac filtering allows you to control wireless access to your network according to clients' MAC addresses.
Configure MAC
Use the drop-down menu to select your desired MAC filtering
Filtering:
method:
Turn MAC Filtering OFF - No MAC filtering will be implemented.
Turn MAC Filtering ON and ALLOW - MAC filtering will be
turned on, and only MAC addresses listed in the table below
will be allowed access.
Turn MAC Filtering ON and DENY - MAC filtering will be turned
on, and only MAC addresses listed in the table below will be
denied access.
Checkbox:
Check the box to include this MAC address in the MAC filtering
rules.
MAC Address:
Enter the MAC address of the client that you wish to filter. If
the client is currently connected to the access point, you can
select it from the Client List drop-down menu, and click << to
automatically populate the field.
Click Clear to clear all fields. Click Save Settings at the top of
the page to save the current configuration.
D-Link DAP-1665 User Manual

Bridge Mode

Access Control

58