D-Link DAP-1665 User Manual page 41

Section 3 - Configuration
802.11
Select one of the following:
Mode: 802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Wireless
Indicates the channel setting for the DAP-1665. The channel
Channel:
can be changed to fit the channel setting for an existing wireless
network or to reduce interference in congested areas. If you
enable Auto Channel Scan, this option will not be available.
Enable Auto The Auto Channel Scan setting can be selected to allow the
Channel
DAP-1665 to automatically choose the channel with the least
Scan:
amount of interference.
Channel Select the appropriate channel width between 20MHz or Auto
Width: 20/40MHz from the drop-down menu.
Visibility
Select whether you want the wireless network name (SSID) of
Status: the 2.4 GHz band to be Visible or Invisible. If Invisible, the
SSID of the DAP-1665 will not be seen by site survey utilities,
so wireless clients will have to manually enter the SSID of your
wireless network in order to connect to it.
Security
For information on how to set up wireless security, please refer
Mode:
to "Configuring Wireless Security" on page 45.
D-Link DAP-1665 User Manual 41