Lan Setup - D-Link DAP-1665 User Manual

Section 3 - Configuration
The LAN Setup page enables you to configure the Local Area Network (LAN) settings for the access point. From this page you
can adjust your local network's IP address settings, and configure IPv6.
Device Name: You can change the name of your access point to make it
easier to identify. Enter a name for the access point in the field
provided. If you change the device name, you should use this
name in your web browser address bar when trying to access
the web-based configuration utility.
Example: http://devicename
My LAN
Select how you would like to configure the access point's IP
Connection is:
address settings from the drop-down menu:
Dynamic IP(DHCP) - The access point will request an IP address
from the DHCP server that it is connected to.
Static IP - You can manually specify the IP address settings for
the access point.
IP Address:
Enter the IP address that you want to specify for the access
point (Static IP only).
Subnet Mask:
Enter the subnet mask to be used by the access point (Static
IP only).
Gateway Address:
Enter the default gateway address to be used by the access
point (Static IP only).
Primary DNS
Enter the primary DNS server address to be used by the access
Server:
point (Static IP only).
Secondary DNS
Enter the secondary DNS server address to be used by the access
Server:
point (Static IP only).
Click Save Settings at the top of the page to save the current
configuration.
D-Link DAP-1665 User Manual

LAN Setup

Dynamic/Static IP
48