Wi-Fi Protected Setup - D-Link DAP-1665 User Manual

Section 3 - Configuration
This section allows you to configure how the DAP-1665 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection.
Enable: Check the box to enable WPS.
Disable WPS-PIN Check the box to disable WPS using the PIN method. If this
Method: option is selected, wireless clients will only be able to use the
WPS-PBC (Push-button Connection) method.
Current PIN: Displays the current PIN which can be used by wireless clients
to connect to the access point. Click Reset PIN to Default to
return the PIN to its factory default. Click Generate New PIN
to randomly generate a new PIN.
Add Wireless Click Add Wireless Device With WPS to activate the WPS-PBC
Station: (Push-button) method. You will then have 120 seconds to press
the WPS button on the new device that you wish to connect.
Click Save Settings at the top of the page to save the current
configuration.
D-Link DAP-1665 User Manual

Wi-Fi Protected Setup

55