Installation Dimensions - Belling BPROC60 AU STA User Manual

Placement
• Danger! Do not disassemble this appliance. Touching internal components of this
appliance can cause serious personal injury or death.
Place the microwave oven on a firm,flat surface.
•
Make sure that there is surfi
•
and sides keep at least 10 cm free.
Do not cover the air vents.
•
The adjustable feet should not be r emoved.
•
Do not place the micr owave oven near a heat source.
•
Transmitting and receiving equipment such as radios and televisions can affect the
•
operation of the microwave oven.

Installation dimensions

450
22 28
542
454.5
455
594
595
min. aeration surface 250 cm min. beluchtingsopp. 250 cm
Note: There should be gap above the oven.
Building in
• Do not hold or carry the appliance by the door handle. The door handle cannot hold
the weight of the appliance and may break off.
1. Carefully push the microwave into the box, making sure that it is in the centre.
2. Open the door and fasten the microwave with the screws that were supplied.
cient ventilation around the micr owave oven. At the rear
min 45 100
560 560-568
min
550
454.5
600 600
min 580 min 580
2 2
2 22 8
542
455
594
595
13
560
558-568
min.
550
458+2
min
min 460
540
min. aeration surface min. beluchtingsopp.
250 cm 250 cm 2 2