3-10-4.Operation Method For Projector - Sony KP-FX532M90 Service Manual

KP-FX432M90/FX532M90
RM-1014
6. Write "VPS, VSZ and HSZ" adjusted data to other mode
service data.
<Write "VPS","VSZ","HSZ">
DRC1250
Normal
GEO(50)
3-10-4. Operation Method for Projector Engine
(PJE) Mode
Write data to NVM
Adjustment item
up
HD/DVD
Adjustment item
down
1 2
User control goes
4 5
to the standard state
7 8
Read data from
0
NVM
DRC-MF
PIC SOUND
SURROUND
MODE MODE
RESET
TV
RM-1014
DRC100
Normal
GEO(50)
DRC1250
Normal
GEO(60)
DRC1250
V COMP
GEO(50)
DRC120
Normal
GEO(60)
DRC100
V COMP
GEO(50)
DRC1250
V COMP
GEO(60)
HD
GEO(50)
DRC120
V COMP
GEO(60)
HD
GEO(60)
Copy data to all
mode
3
Color change
6
Internal test signal
9
Initialize data
JUMP
(Not stored)
Mode selec
MENU
(Fine carsor)
WIDE
MODE
PROGR
Up : Data up (V)
Left : Data up (H)
Down : Data down (V)
Right : Data down (H)
Push : Enter
1. Functions of Keys on Commander
• 1 : Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to outside.
(in fine adjustment mode)
• 4 : Changes adjustment item.
(item No. moves down)
: Marker moves counterclockwise from outside to
center. (in fine adjustment mode)
• : Changes data value.
(up, down, or to the left or right)
(move) :Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3 : Changes adjustment color.
(except item No. 00~38) GRN c BLU c RED
• 6 : Displays or changes internal test signals.
: monoscope c crosshatch + monoscope c
crosshatch + borderline c crosshatch c dot c
white pattern
• 9 : Switches adjustment mode.
carsor adjustment mode y fine adjustment
mode
• : Switches marker moving method.
(push) (in fine adjustment mode)
joystick key c 1 and 4 buttons
Commander Function (PJE mode)
Button Mode
+ - WRITE
7 + - READ
5 + -
*PJE
INITIAL
2 + -
*PJE
COPY
* : only data in the PJE mode.
2. Operation Method for Rough Adjustment
1) Set in the Service mode, and select the category "PJE".
2) Press "1" or "4" button on the commander to select the
item, and move "
change the data.
PJE
FDIS
Adjustment Item
3) Select item "GRN CENT". When BLU or RED is displayed,
press "3" button on the commander to change the adjustment
color in the order of GRN c BLU c RED.
– 68 –
Description
Writes data to NVM.
Reads data from NVM.
INITIALIZED ALL DATA
Copies and writes data of DRC1250
(50Hz) mode to all other modes.
" up, down, or to the left or right to
Item No.
Data V-Frequency
00 00 60
|