Sony KP-FX532M90 Service Manual page 71

2. Red Adjustment
1) Place a cap on the blue lens so that green and red colors are
displayed.
2) Press "3" button on the commander to select RED mode.
3) Adjust the following items so that blue lines overlap with
green lines.
• BLU CENT (horizontally/vertically)
• RED SKEW (horizontally/vertically)
• RED SIZE (horizontally/vertically)
• RED LIN (horizontally)
• RED MSIZ (horizontally)
• RED MLIN (horizontally)
• RED PIN (horizontally/vertically)
• RED KEY (/vertically)
4) Press "9" button on the commander to enter the fine adjust-
ment mode.
5) Make fine adjustment so that horizontal lines and vertical
lines overlap with green lines.
6) Press "9" button on the commander to return to the rough
adjustment mode.
3. Blue Adjustment
1) Place a cap on the red lens so that green and blue colors are
displayed.
2) Press "3" button on the commander to select BLUE mode.
3) Hereinafter, use same manner as that of blue adjustment to
adjust so that the red lines overlap with green lines.3.
Blue Adjustment
4. Registration Data Writing
1) Select " PJE "service item.
Ex.PJE 00 FDIS
2) Select " PJE 03 ALCP" change date " 00" to " 01" using Joy
Stick Key, Then push " MUTE" + " 0".
Confirm red ALCP OSD appear.
3) Regi data of DRC1250(PAL) is copied to all other mode.
When ALCP OSD disappear, data copy is finished.
<PJE adjusted DATA ALL COPY>
DRC1250 DRC100
Nomal
PJE(50) PJE(50)
DRC1250
WZ/V COMP
DRC100
WZ/V COMP
PJE(50)
PJE(50)
Nomal
DRC1250
Nomal
PJE(60)
PJE(50)
DRC120
Nomal
PJE(60)
DRC1250
WZ/V COMP
PJE(60)
HD
DRC120
WZ/V COMP
PJE(60)
HD
PJE (60)
5. Confirm registration of each mode and touch-
up.
1) Receive PAL signal. Select DRC1250 50Hz normal mode.
(PAL) by "MENU" Confirm registration.
2) Select DRC1250 50Hz V comp mode. (PAL) by "MENU"
Confirm registration.
3) Select DRC100 50Hz V comp mode. (PAL) by "MENU"
Confirm registration.
4) Select DRC100 50Hz normal mode. (PAL) by "MENU"
Confirm registration.
5) Receive NTSC signal. Select DRC1250 60Hz normal mode.
(ntsc) by "MENU" Confirm registration.
6) Select DRC1250 60Hz V comp mode. (NTSC) by "MENU"
Confirm registration.
7) Select DRC100 60Hz V comp mode. (NTSC) by "MENU"
Confirm registration.
8) Select DRC100 60Hz normal mode. (NTSC) by "MENU"
Confirm registration.
9) Connect HD (1080i/50) signal to COMPONENT-1. Select
COMP-1 by TV/VIDEO buttom.
Confirm registration, and if necessary adjustment touch-up
registration by FINE mode.
10) Connect HD (1080i/60) signal to COMPONENT-1. Select
COMP-1 input by TV/VIDEO buttom.
Confirm registration, and if necessary adjustment touch-up
registration by FINE mode.
– 71 –
KP-FX432M90/FX532M90
RM-1014