Id Settings; Set Paper Size; Set Frame Size; Set Number Of Frame - FujiFilm CX-550 Owner's Manual

2 Enjoy various printing!

ID SETTINGS

ID print frame size and number of frames can be freely selected and registered.
The registered settings are saved even when the printer power is turned off.
e e e
OTHER PRINT (➔P.21) continued
ID settings
1
Use f to select "ID SETTINGS", and press the
[SET] button.
2
Use f to select the setting you want to
change, and press the [SET] button.
Note
• 6 templates of frame layout can be registered.
• Any template except 35 × 45 mm × 4, 51 × 51 mm × 2 can be
replaced with your preference taking the following procedure.
• For 35 × 45 mm × 4 and 51 × 51 mm × 2, paper size and
number of frame cannot be changed, and automatic
"ROTATION" of each picture can be set in the setting check
screen.

Set paper size

3
Use f to select the paper size, and press the
[SET] button.

Set frame size

4
Set the frame size.
Use f to select the direction you want to set
and use g to set the frame size.
c: Widens the frame size by 1 mm.
d: Narrows the frame size by 1 mm.
At the end of setting, press the [SET] button.
Note
• When the set frame size aspect ratio is not within the 0.5 – 2
range, an alarm display appears and the monitor returns to
the "FRAME SIZE" window. Input so that the aspect ratio is
within the 0.5 – 2 range.
34
Select

Set number of frame

5
Set the number of frames.
Use f to select the direction you want to set
and use g to select the number of frames.
c: Increases the number of frames by 1.
d: Decreases the number of frames by 1.
At the end of setting, press the [SET] button.
Setting check
6
If the preview contents are correct, press the
[SET] button.
The setting is registered and the monitor returns
to the "MODE" window.
Note
• The image of the first frame of the memory card is used at
the preview window. When the first frame is destroyed, is
unknown, or is an audio file, an icon is displayed and preview
display is not performed. In this case, the "ROTATION"
setting remains the same as the last time.

Try printing at the registered settings

1
Load the paper and insert the memory card into
the printer, and press the [ID PRINT] button on
the printer.
2
Use f to select the newly registered ID photo
print setting, and press the [SET] button.
Thereafter, select the picture the same as from
step 3 of page 32 and print.
"PAPER SIZE", "FRAME SIZE", "NUMBER OF FRAMES" setting range.
Frame Size
Paper Size
Horizontal Vertical
100 mm × 148 mm
20 mm – 142 mm 20 mm – 94 mm
74 mm × 100 mm
20 mm – 94 mm 20 mm – 68 mm
55 mm × 100 mm
20 mm – 94 mm 20 mm – 49 mm
79 mm × 100 mm
45 mm 35 mm
100 mm × 110 mm
51 mm 51 mm
Enjoy various printing!
T I P
• "ROTATION" can be set using
g . When "ROTATION" is
set, the picture is automatically
turned during ID printing.
• When re-setting, press the
[BACK] button.
Number of Frames
Horizontal Vertical
1 – 6 1 – 4
1 – 4 1 – 3
1 – 4 1 – 2
2 2
2 1
35
2