Custom Wood Overlay Panels; Custom Wood Overlay Panel Dimensions; Installation Instructions; Unpack The Refrigerator - Jenn-Air JS42NXFXDW Installation Manual

Custom Wood Overlay Panels

Custom wood overlay panels allow you to blend the exterior of
your refrigerator into the overall kitchen décor, and to use custom
handles for additional design flexibility.
In some cases, your cabinet manufacturer may choose to work
with one panel routed for the different dimensions. Follow these
panel dimension and placement instructions to be sure that the
custom wood overlay panels will fit properly.
IMPORTANT:
The weight of the refrigerator door wood overlay panel cannot
exceed 66 lbs (29.9 kg) for 48" models or 65 lbs (29.5 kg) for
42" models.
The weight of the freezer door wood overlay panel cannot
exceed 50 lbs (23 kg) for 48" models or 49 lbs (22.2 kg) for 42"
models.
The weight of the top grille wood overlay panel cannot exceed
8 lbs (3.6 kg) for 48" models or 7 lbs (3.2 kg) for 42" models.
The required thickness for all panels is ³⁄₄" (1.91 cm).
This installation does not require filler or backer panels.

Custom Wood Overlay Panel Dimensions

Door Panels
A
Freezer
¹⁄₄
74 "
Door Panel
(188.6 cm)
CAUTION
Pinch Hazard
Installation of door panels with less than a ³⁄₈" (0.95 cm) gap
between the door panel and the adjacent cabinet increases
the risk of potential pinching.
Model 42
³⁄₈"
Reveal
A 17⁹⁄₁₆" 17¹³⁄₁₆"
(44.61 cm) (45.24 cm)
B 23⁹⁄₁₆" 23¹³⁄₁₆"
(59.85 cm) (60.48 cm)
B
Refrigerator
Door Panel
48
¹⁄₈" ³⁄₈"
20¹⁄₁₆" 20⁵⁄₁₆"
(50.96 cm) (50.17 cm)
27¹⁄₁₆" 27⁵⁄₁₆"
(68.74 cm) (69.37 cm)
Grille Panel
Integrated Installation - Full Height Grille - Open Soffit
⁵⁄₈
6
(16.83 cm)
Model
Reveal
C 41¹⁄₄"
(104.76 cm)
Standard Installation - Flush Grille - Open or Closed Soffit
1" (2.54 cm)
³⁄₄
5
(14.55 cm)
Model
Reveal
D 41¹⁄₄"
(104.76 cm)
E 41¹⁄₄"
(104.76 cm)
IMPORTANT: The grille panel height, shown in the Standard
Installation Flush Grille graphic, allows for an air gap critical to
refrigerator performance.

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT:
Do not remove the film covering until the refrigerator is in its
¹⁄₈"
operating location.
All four leveling legs must contact the floor to support and
stabilize the full weight of the refrigerator.
Keep the cardboard shipping piece or plywood under the
refrigerator until it is installed in the operating location.
C
"
Top Grille Panel
42
³⁄₈" ¹⁄₈"
41³⁄₄" 47¹⁄₄"
(106.05 cm) (120.02 cm)
D
Top Grille Filler
E
"
Top Grille Panel
42
³⁄₈" ¹⁄₈"
41³⁄₄" 47¹⁄₄"
(106.05 cm) (120.02 cm)
41³⁄₄" 47¹⁄₄"
(106.05 cm) (120.02 cm)
WARNING
Tip Over Hazard
48
³⁄₈" ¹⁄₈"
47³⁄₄"
(121.29 cm)
48
³⁄₈" ¹⁄₈"
47³⁄₄"
(121.29 cm)
47³⁄₄"
(121.29 cm)
13