Table of Contents
Advertisement
CUSTOM OVERLAY DRAWER PANELS
If you plan to install custom wood panels, you will need
to create the panels yourself or consult a qualified
cabinetmaker or carpenter. See dimension drawings for
panel specifications.
IMPORTANT:
The thickness of the overlay panels must be 3/4"
(19 mm).
To avoid damage to the drawers, each overlay panel
must not weigh more than 10 lbs (4.5 kg).
Do not exceed the height dimension for the overlay
panels. Panels that exceed the height dimension
may damage the refrigerator drawers, cabinets or
countertop.
The width of the overlay panels may vary according to
the width of the cabinet opening.
1/8" (2.5 mm) Holes [Depth 3/8" (10 mm)]
1/8" (2.5 mm) Holes [Depth 3/8" (10 mm)]
8
TOP AND BOTTOM OVERLAY DRAWER PANEL DIMENSIONS
A.Router 1/8" (2.5 mm) deep.
For the installation of the customer panel, you will
need the following parts:
16 screws (SS Flat M4x12 tapping 1)
4 Self-tap wood screws
4 Drawer overlay hook plate right (SPHC T=2.3)
4 Drawer overlay hook plate left (SPHC T=2.3)
A. SS Flat M4x12 tapping screws
B. Self-tap wood screws
NOTE: Some or all parts may or may not be included.
If your product does not include these parts, contact
Assistance or Service or ask a specialist.
233/4" (603 mm)
Top
Back Panel
Bottom
211/8" (536.4 mm)
A
B
C
D
C. Overlay hook plate right
D. Overlay hook plate left
1"
(26 mm)
15/16"
(24.3 mm)
Advertisement
Table of Contents
