Advertisement
3
Operating Your Appliance
Press lock button to pull out the
water container (Figure 1) from the
appliance by holding from handle.
Press lock button
Figure 1
Remove the filter unit being held
horizontally by means of two
snap-on buttons from the water
container (Figure 2)
Snap-on lock button
Figure 2
Fill the water container with normal
tap water up to the MAX level
mark as shown in Figure 2.
Required water amount is 600 ml.
Install the filter unit back on the
water container paying attention
to aligning it properly. Install the
water container on the appliance
again.
Pull out the plug and cable at the
back of the product and plug it
into the socket. Stop pulling when
the yellow mark on the supply
cable comes out, a red mark will
come after the yellow mark; never
pull further than the red mark.
Handle
Otherwise, you may damage your
product's cable winder.
Attach the hose assembly sup-
plied with your product on to
your vacuum cleaner. To start the
vacuum cleaner, first press the
On/Off button. (Figure 3)
To rewind the cable after vacuum
cleaning process is completed
press the cable winding button on
your appliance. (Figure 4) Do not
MAX
SU SEVIYESI
step on the cable winding button.
Mechanism may be damaged if it
is pressed forcefully by foot.
4
Figure 3
Figure 4
Advertisement
