Advertisement
4
Maintenance and Cleaning
EMPTYING AND CLEANING THE
WATER CONTAINER
Turn off your appliance by the on/
off button and unplug it. Remove
the water container by hold-
ing from the handle (Figure 2).
Remove the filter unit and turn it
upside down so that the opened
part points downwards, and
empty it (Figure 15).
(Figure 15)
Filter unit may be detached from
the container (Figure 16) and
washed in the water.
Snap-on lock button
(Figure 16)
HEPA filter and sponge filters may
be removed from the appliance
and washed (Figure 17 and Figure
18).
Furthermore, the exhaust sponge
must be washed clean every 6
months by opening the exhaust
filter cover at the rear side of the
appliance.
If you wish to carry on vacuum
cleaning, fill with water up to the
relevant level and wait until the fil-
ter unit and the HEPA filter get dry
before replacing them back on the
appliance. Place the related parts
into the filter cage and re-attach
the filter unit in the appliance.
Now, the appliance is ready to be
stored.
Note: Water in the container does
not damage the appliance; how-
ever, it is recommended that you
empty the appliance before storing
it. One of the greatest advantages
of this appliance is that, contrary
to the vacuum cleaners that have
to be stored with the dust in their
bags, it can be stored as cleaned.
7
(Figure 17)
(Figure 18)
Advertisement
