Advertisement
1
Safety Warnings
• You may only use your vacuum
cleaner if the voltage indicated
on the label under your vacuum
cleaner complies with the supply
voltage. Otherwise, the motor may
be damaged.
• Never leave your vacuum
cleaner plugged in. Unplug your
appliance when not in use or
when service is required.
• Do not use your vacuum cleaner
on wet floors and outdoors.
• Physically (audio, visual) im-
paired and mentally handicapped
persons and those without proper
experience and knowledge as
well as children may not use the
product without supervision of a
person in charge of their safety.
Children must be kept under
supervision when the product is
in use and it must be made sure
that children do not tamper with
the product.
• If the supply cable or plug is
damaged, or if your appliance
does not work due to drop-
ping, damage, exposing to outer
conditions or wetting, refer to the
authorized services.
• Do not pull the appliance from
the supply cable. Keep the supply
cable away from sharp edges, hot
surfaces and pay attention not to
pinch it between door frames.
• Do not unplug by pulling the ca-
ble. Always hold the plug to take it
out from the socket.
• Do not touch the plug or the
appliance with wet hands.
• Do not drop anything on to the
exposed parts of your vacuum
cleaner. Pay attention that the air
ducts and openings are always
open.
• Keep your hands, hair and
clothes away from the running
parts of the appliance.
• Do not use your vacuum cleaner
to clean combustible substances
such as lit cigarettes, matches or
hot ash.
• Always turn off all control but-
tons on your vacuum cleaner prior
to unplugging it.
• Do not absorb combustible and
explosive liquids with your vacuum
cleaner. Do not use your vacuum
cleaner at areas where such
liquids exist.
• Always unplug the appliance
prior to attaching or replacing the
supplied accessories.
• Do not operate your vacuum
cleaner in a vertical position to the
floor.
• Do not use your vacuum cleaner
when its filters are not attached
and without putting water in it.
Things to be done for energy
saving
• If your vacuum cleaner is
featured with absorption power
adjustment, you can have the ap-
pliance draw less energy.
• Cleaning your product's filters
frequently or replacing the same
will both increase your product's
performance and also decrease
cleaning time which will provide
energy saving.
2
Advertisement
