Luraco iROBOTICS 6 User Manual page 12

3. Put the pillow on the right position of backrest and secure (Fig. 15 and Fig. 16).
5. Finally connect the air pipes be sure that green clamps are secure. (Fig. 17). The color on air pipes should
be matched. Note total number of air pipes (2-right arm, 2-left arm, 3 seat, and 2 head)
6. Match the Velcro of foot massager windshield leather and seat leather Velcro (Fig. 18) and place seat
cushion in proper position.
Step 7: Install Controller
Place the controller on the handle as shown in Fig. 19.
OPERATION AFTER ASSEMBLY
Fig. 16
Fig. 18
Fig. 21
SD Card
11
Fig. 17
Fig. 19
Fig. 22