Front Panel; Ds-7204Hvi-St Front Panel - HIKVISION DS-7200HVI-ST Series Quick Operation Manual

DS-7200HVI-ST Series DVR Quick Operation Guide

Front Panel

DS-7204HVI-ST Front Panel

1. Status Indicators:
•
POWER: the POWER indicator turns green when DVR is powered up.
•
STATUS: the indicator lights when compound key switches to numeric/letter input mode.
•
Tx/Rx: TX/RX indictor flickers green when network connection is functioning normally.
2. IR Receiver: operation by IR remote control.
3. Compound Buttons:
•
1 MENU: (1) Enter numeral "1"; (2) Access the main menu interface
•
2ABC/F1: (1) Enter numeral "2"; (2) Enter letters "ABC"; (3) The F1 button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
3DEF/F2: (1) Enter numeral "3"; (2) Enter letters "DEF"; (3) The F2 button is used to cycle through tab
pages. It will also bring up the Channel & OSD Position settings.
alarm shop
•
4GHI/ESC: (1) Enter numeral "4"; (2) Enter letters "GHI"; (3) Exit and back to the previous menu.
•
5JKL/EDIT: (1) Enter numeral "5"; (2) Enter letters "JKL"; (3) Delete characters before cursor; (4)Select
the checkbox and ON/OFF switch; (5) Start/stop record clipping in playback.
•
6MNO/PLAY: (1) Enter numeral "6"; (2) Enter letters "MNO"; (3) Playback, for direct access to playback
interface.
•
7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Manual record, for direct access to
manual record interface; manually enable/disable record.
•
8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control interface.
•
9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera display in preview
•
0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase alphabet, symbols and
numeric input).
4. SHIFT: Switch of compound keys between the numeric/letter input and functional control.
5. Control Buttons:
•
Directional buttons: In menu mode, the direction buttons are used to navigate between different fields and
items and select setting parameters. In playback mode, the Up and Down buttons are used to speed up and
slow down record play, and the Left and Right buttons are used to select the recording 30s forwards or
backwards. In preview mode, these buttons can be used to cycle through channels.
•
Enter: The Enter button is used to confirm selection in menu mode; or used to select checkbox fields and
ON/OFF switch. In playback mode, it can be used to play or pause the video. In single-frame play mode,
pressing the Enter button will advance the video by a single frame. And in auto sequence preview mode, the
buttons can be used to pause / resume auto sequence.
6. USB Interface: Connects USB mouse or USB flash memory devices.
3