4.
Remove the memory module from its connector on the system board.
5.
Repeat steps 2 and 3 to remove the second memory module.
Installing the Memory
1.
Insert the memory module into the memory socket.
2.
Press the securing clips to secure the memory module to the system board.
3.
Install:
a) base cover
b) battery
4.
Follow the procedures in
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
2.
Remove:
a) battery
b) base cover
3.
Disconnect the antenna cables from the WLAN card.
After Working Inside Your Computer .
Before Working Inside Your Computer .
23