Installing The Display Hinges; Removing The Camera - Dell Latitude E643 Owner's Manual

Installing the Display Hinges

1. Place both the display hinges on the panel.
2. Tighten the screws to secure the display hinges to the display assembly.
3. Place the display hinge plates on the hinges.
4. Tighten the screws to secure the display hinge plates to the display assembly.
5. Install:
a) display panel
b) display bezel
c) display assembly
d) keyboard
e) keyboard trim
f) bluetooth card
g) hard drive
h) base cover
i) battery
6. Follow the procedures in

Removing the Camera

1. Follow the procedures in
2. Remove:
a) battery
b) display assembly
c) display bezel
d) display panel
3. Disconnect the LVDS and camera cable from the camera.
After Working Inside Your Computer .
Before Working Inside Your Computer .
53