Table of Contents
Advertisement
Troubleshooting
If...
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message
appears on EVF/LCD
screen
Memory card not
recognized or camera
freezes with card.
Computer/connectivity problems
If...
Computer does not
communicate with
the camera
42
Try one or more of the following
■
Transfer pictures to the computer
■
Delete pictures from the card or insert a new one
■
Change image storage location to internal memory
(page
29).
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera. See
■
Insert a new or charged battery
■
Turn camera off, then on again. Make sure the camera is not
in Favorites mode.
■
Depress shutter button all the way
■
Insert a new or charged battery
■
Wait until the AF/AE indicator turns green before attempting
to take another picture.
■
Memory full. Transfer pictures to the computer
delete pictures
insert another card.
■
Turn the camera off, then on again.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry
cloth
(page
54).
■
Insert a new or charged battery
■
If all else fails, get customer support help
■
Card may be corrupted. Format card in camera
■
Use another memory card.
Try one or more of the following
■
Insert a charged battery
■
Turn on the camera.
■
Make sure proper USB cable is connected on camera and
computer port
(page
all cable connections. Make sure the camera is seated on
the dock.
■
Make sure the EasyShare software is installed
(page
page
54.
(page
(page
(page
11), change image storage location, or
(page
(page
2).
14). (If using an EasyShare dock, check
www.kodak.com/go/support
12).
(page
(page
54).
2).
(page
5).
2).
(page
12),
2).
(page
45).
(page
32).
(page
12).
11).
Hide quick links:
Advertisement
Table of Contents
