Changing the display, EVF or LCD
Your camera has an Electronic Viewfinder (EVF). The EVF, like the LCD (Liquid Crystal
Display) screen, displays what the camera captures.
EVF/LCD
toggle
button
NOTE: The EVF/LCD screen turns off after 1 minute if no pictures are taken. Press any button to turn the
display back on.
Using the diopter dial
You can adjust the EVF sharpness for your eyesight.
Diopter dial
Checking camera and picture status
The icons that appear on the EVF/LCD screen indicate the active camera and picture
settings.
www.kodak.com/go/support
Press the EVF/LCD toggle button to change the
screen from EVF to LCD, and back.
The selection remains until you press
the button again.
■
Look through the EVF.
EVF
Turn the Diopter dial until the viewfinder image is
■
sharp.
Press the Status
Status
and on.
button
Getting started
button to turn the icons off
7