Installing The Battery In The Camera - Kodak EasyShare DX4530 User Manual

Installing the Battery in the Camera

The camera dock will only charge the Ni-MH battery (not other batteries).
IMPORTANT: The battery is not charged when you receive it. See
page 66
64
Chapter 9
1
Turn off the camera.
2 Open the battery door.
3
Install the battery as shown.
4 Close the battery door.
for charging instructions.
CAUTION: CAUTION:
CAUTION: CAUTION:
The battery can only be inserted
into the camera as shown. If the
battery does not install,
reposition it and try again. DO
NOT FORCE IT; doing so can
damage your camera.