Upgrading Your Software And Firmware; Tips, Safety, Maintenance - Kodak EasyShare DX4530 User Manual

Upgrading Your Software and Firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera).
See www.kodak.com/go/dx4530downloads.

Tips, Safety, Maintenance

m
Always follow basic safety precautions. Refer to the "Important Safety
Instructions" booklet packed with your camera.
m
Do not allow any chemicals, such as suntan lotion, to come into contact
with the painted surface of the camera.
m
If the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
battery and card. Allow all components to air-dry for at least 24 hours
before using the camera again.
m
Clean the lens and camera screen:
1 Blow gently on the lens or camera screen to remove dust and dirt.
2
Moisten the lens or camera screen by breathing lightly on it.
3
Wipe the lens or camera screen gently with a soft, lint-free cloth or an
untreated lens-cleaning tissue.
m
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens or camera screen with
chemically treated eyeglass lens tissue. It may scratch the lens.
m
Wipe the outside of the camera with a clean, dry cloth. Never use harsh or
abrasive cleaners or organic solvents on the camera or any of its parts.
m
Service agreements are available in some countries. Contact a dealer of
Kodak products for more information.
m
For digital camera disposal or recycling information, please contact your
local authorities. In the US, see the Electronics Industry Alliance Web site at
www.eiae.org
www.kodak.com/go/dx4530support.
92
Chapter 12
or the Kodak Web site at