Kodak EasyShare DX4530 User Manual page 88

SD/MMC Cards and Internal Memory
Problem
The camera does
not recognize
your SD/MMC
card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full. Storage is full.
76
Chapter 10
Cause
Card may not be
SD/MMC certified.
Card may be corrupt. Reformat the card
No card is inserted in
camera or card is not
fully inserted.
Camera detects an
error when the card
was inserted or
removed.
The maximum
number of files or
folders is reached (or
other directory
concern).
Solution
Purchase a certified SD/MMC
card (page 10).
Caution: Formatting erases all
pictures and videos, including
protected files.
Insert a card into the card slot,
then push to seat the connector
(page 10).
Turn the Mode dial off, then back
on.
Make sure the camera is off when
inserting or removing a card.
Transfer pictures and videos to
the computer, then delete them
from the camera.
Transfer pictures and videos to
the computer, then format the
card or internal memory
(page 53).
Caution: Formatting a card erases
all pictures and videos, including
protected files. (Formatting
internal memory also erases
email addresses. To restore
addresses, see Kodak EasyShare
software Help.)
(page 53).