Kodak EasyShare DX4530 User Manual page 86

Problem
Picture is not clear. The lens is dirty.
Slide show does
not run on external
video device.
74
Chapter 10
Cause
Subject too close
when taking picture.
Subject or the
camera moved
while the picture
was taken.
The subject is too
far away for the flash
to be effective.
Video Out setting is
incorrect.
External device is
set incorrectly.
Solution
Clean the lens (page
Move so there is at least 2.0 ft (0.6
m) between the camera and the
subject, or at least 2.8 in. (7.0 cm)
in Close-up mode.
Hold the camera steady while taking
the picture.
Move so there is no more than 11.2
ft (3.4 m) between the camera and
the subject; 6.6 ft (2.0 m) in
Telephoto.
Adjust the camera Video Out setting
(NTSC or PAL,
page 52).
Refer to the external device's user's
guide.
92).