Kodak EasyShare DX4530 User Manual page 85

Problem
Picture is too dark. Flash is not on or
Picture is too light. The flash is not
Chapter 10
Cause
did not function.
The subject is too
far away for the flash
to have an effect.
The subject is in
front of a bright light
(backlit).
Lighting condition is
too dark.
needed.
The subject was too
close when the flash
was used.
The light sensor is
covered.
Lighting condition is
too bright.
Solution
Turn on the flash
Move so there is no more than 11.2
ft (3.4 m) between the camera and
the subject; 6.6 ft (2.0 m) in
Telephoto.
Use Fill flash (page
your position so the light is not
behind the subject.
Increase Exposure Compensation
(page 27) or Long Time Exposure
(page 28).
Change to Auto flash
(page 24).
Move so there is at least 2.0 ft (0.6
m) between the camera and the
subject.
Hold the camera so your hands or
other objects do not cover the light
sensor.
Decrease exposure compensation
(page 27).
(page 24).
24) or change
73