Kodak EasyShare DX4530 User Manual page 84

Problem
In Review mode,
you do not see a
picture (or the
expected picture)
on the camera
screen.
In Review mode,
pictures are
displayed as black
screens.
Picture orientation
is not accurate.
Camera freezes up
when a card is
inserted or
removed.
72
Chapter 10
Cause
The camera may not
be accessing the
correct storage
location.
Lens cap is on,
preventing lens
from extending.
The camera sensed
that it was rotated or
tilted while the
picture was taken.
Camera detects an
error when the card
was inserted or
removed.
Solution
Check the picture storage location
setting (page 11).
Remove the lens cap.
Set the Orientation Sensor
(page 31). Turn off the Orientation
Sensor when your subject is above
or below you (such as in the sky or
on the floor).
Turn the Mode dial off, then back
on. Make sure the camera is turned
off before inserting or removing a
card.