Installing The Battery Pack In The Camera; Docking The Camera - Kodak EASYSHARE DX4900 User Manual

Installing the Battery Pack in the Camera

IMPORTANT: The batteries in the Battery Pack are not charged

Docking the Camera

When you are ready to transfer your pictures from the camera to the computer,
or charge the Battery Pack, place the camera in the Camera Dock.
Connector
Chapter 8
1
2
3
when you receive it. See
instructions.
1
2
Tripod
socket
Door
open
Open the battery door on the bottom of the
camera.
Install the Battery Pack in the direction of
the arrows, as illustrated.
CAUTION:
The Battery Pack can only be
inserted into the camera in the
orientation shown. If the
Battery Pack does not easily
install, reposition it and try
again. DO NOT FORCE IT. Doing
so can damage your camera.
Close the battery door.
page 58
Turn off the camera.
On the camera bottom, slide the dock
connection door until it clicks open.
for charging
57