Double Button Presses - Kurzweil PC3 Getting Started Manual

Double Button Presses

Pressing two or more related buttons simultaneously executes a number of special functions
depending on the currently selected mode. Make sure to press them at exactly the same time.
In this mode
or editor...
Octav-, Octav+
Program mode
Chan–, Chan+
Plus/Minus
Master mode Chan/Layer
Left/Right cursor buttons
Song mode Up/Down cursor buttons
Chan/Layer
Left/Right cursor buttons
Storage mode
up/down cursor buttons
Program Editor Chan/Layer
Plus/Minus
2 leftmost soft buttons
Center soft buttons
Any Editor
2 rightmost soft buttons
Left/Right cursor buttons
Up/Down cursor buttons
Cancel/Enter
Save Dialog Plus/Minus buttons
Preliminary - Subject to Change
...pressing these
buttons
simultaneously...
Table 3-1 Double Button Presses
Reset MIDI transposition to 0 semitones. Double-press again to go
to previous transposition.
Set current MIDI channel to 1.
Step to next Program bank (100, 200, etc.)
Enables Guitar/Wind Controller mode.
Toggle between Play and Stop.
Toggle between Play and Pause.
Select all tracks on any TRACK page in Song Editor.
Select all items in a list. Move cursor to end of name in naming
dialog.
Clear all selections in a list. Move cursor to beginning of name in
naming dialog.
Select Layer 1.
Scroll through the currently selected parameter's list of values in
regular or logical increments (varies with each parameter).
Reset MIDI transposition to 0 semitones. Double-press again to go
to previous transposition.
Select Utilities menu
Sends all notes/controllers off message on all 16 channels (same as
Panic soft button).
Toggle between Play and Stop of current song.
Toggle between Play and Pause of current song.
Panic (sends all notes/controllers off message on all 16 channels)
Toggle between next free ID and original ID.
User Interface Basics
...does this:
Data Entry
3-9