Double Button Presses - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Double Button Presses

Pressing two or more related buttons simultaneously executes a number of special functions depending on
the currently selected mode. Make sure to press them at exactly the same time.
IN THIS MODE:
PROGRAM MODE
MASTER MODE
SONG MODE
DISK MODE
PROGRAM EDITOR
SAMPLE EDITOR
ANY EDITOR
SAVE DIALOG
THESE BUTTONS:
(Pressed simultaneously)
Octav-, Octav+
Chan-, Chan+
Plus/Minus
CHAN/BANK
left/right cursor buttons
up/down cursor buttons
Plus/Minus
CHAN/BANK
2 leftmost soft buttons
CHAN/BANK
left/right cursor buttons
up/down cursor buttons
CHAN/BANK
2 leftmost soft buttons
Plus/Minus
Plus/Minus
2 leftmost soft buttons
Center soft buttons
2 rightmost soft buttons
Plus/Minus
WILL DO THIS:
Reset MIDI transposition to 0 semitones. Double-
press again to go to previous transposition.
Set current MIDI channel to 1.
Step to Program 100, 200. etc.
Enables Guitar/Wind Controller Mode.
Toggle between Play and Stop.
Toggle between Play and Pause.
Select Quantize Grid values on MISC page and
Edit Song:TRACK Quantize page. Select duration
for a step on Edit Song:STEP page. Increment Ga-
teTime by 20% intervals on Edit Song: STEP page.
Select all tracks on Edit Song:TRACK page.
Issue SCSI Eject command to currently selected
SCSI device.
Hard format SCSI device. List selected objects
when saving objects.
Select all items in a list. Move cursor to end of
name in naming dialog.
Clear all selections in a list. Move cursor to begin-
ning of name in naming dialog.
Select Layer 1.
Toggle between default zoom setting and current
zoom setting.
Set the value of the currently selected parameter
at the next zero crossing.
Scroll through the currently selected parameterÕs
list of values in regular or logical increments (var-
ies with each parameter).
Reset MIDI transposition to 0 semitones. Double-
press again to go to previous transposition.
Select Utilities menu.
Sends all notes/controllers off message on all 16
channels (same as Panic soft button).
Toggle between next free ID and original ID.
User Interface Basics
Data Entry
3-5