c.
Release the connector (1) that secures the display panel cable connector to the display panel.
d.
Disconnect the display panel cable (2) from the display panel and remove the panel (3).
5.
If it is necessary to replace the webcamera/microphone module:
a.
Disconnect the webcamera/microphone module cable (1) from the webcamera/microphone
module. (The webcamera/microphone module cable is part of the display panel cable.)
b.
Detach the webcamera/microphone module (2) from the display enclosure.
6.
If it is necessary to replace the hinges:
a.
Remove the four Phillips M2.5×4.0 screws (1) and (2) that secure the hinges to
the display enclosure.
b.
Remove the display hinge covers (2).
72
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts