Moving The Projector; Transporting The Projector; Cautions In Handling The Projector - Sanyo PLC-XM100 Owner's Manual

Safety Instructions
Use the handle grip when moving the projector.
Retract the adjustable feet to prevent damage to the lens and
cabinet when carrying.
When this projector is not in use for an extended period, put it into a
suitable case to protect the projector.
CAUTION IN CARRyING OR

TRANSPORTING THE PROjECTOR

– Do not drop or bump the projector, otherwise damages or
malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information about
transporting the projector by courier or any other transport
service, consult your dealer.
– Do not put the projector in a case before it is cooled
enough.
Do not hold the lens or the lens compartment tube when lifting or
moving the projector. Doing so may cause damage to the lens and
the projector.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces, or put other things on the cabinet.
CAUTION
Projection lens is a motorized lens. Please note the
followings when using the projector.
● Do not touch the lens while it is moving as this
could cause injury to the fingers.
● Never allow children to touch the lens.

Downloaded From projector-manual.com Sanyo Manuals

Moving the Projector

Cautions in Handling the Projector

Do not hold the lens and the peripheral part.