Image Adjustment - Sanyo PLC-XM100 Owner's Manual

1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Image adjust and then press
the Point ► or the SELECT button.

Use the Point ▲▼ buttons select the desired item and then
press the SELECT button to display the adjustment dialog
box. Use the Point ◄► buttons to adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press the Point
► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press the
Point ► button to increase the brightness (from 0 to 63).
Color
Press the Point ◄ button decrease the intensity of the color; press
the Point ►button increase the intensity of the color (from 0 to 63).
Tint
Press the Point ◄► buttons to adjust the tint value to get a proper
color balance (from 0 to 63).
Color temp .
Use the Point ◄► buttons to select the desired Color temp. level
(XLow, Low, Mid or High ).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the Point ►
button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the Point ►
button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the Point ►
button to deepen blue tone (from 0 to 63).
Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45).
Downloaded From projector-manual.com Sanyo Manuals

Image Adjustment

Image adjust Menu
Video Input
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store
Selected Image mode
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store
Reset
Store
Use the Point
◄►
buttons to adjust the
setting value.
32
32
32
32
High
28
32
35
8
8
1/2
32
32
32
32
High
28
32
35
8
8
1/2
47