Operating With Remote Control - Sanyo PLC-XM100 Owner's Manual

Multimedia projector

Owner's manual (149 pages)

Network manual (60 pages)

Specifications (1 page)

Table of Contents

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to

make the desired operation quickly without calling up the On-Screen Menu.

AUTO PC button

Press the AUTO PC button on the remote control to operate the

Auto PC adj. function. The computer screen adjustment can be

done easily by pressing this button. See page 37 for details.

SCREEN button

Press the SCREEN button on the remote control to select the desired

screen size. The selected screen size symbol appears on the screen

for 4 seconds. See pages 42 to 44 and 49 to 50 for details.

Press and hold the SCREEN button for more than 5 seconds to

return all the screen size adjustment setting to the factory default

setting.

SHUTTER button

See page 27 for details.

D .ZOOM button

Press the D.ZOOM button on the remote control to enter to the

Digital zoom +/– mode. See page 43 for details.

LENS SHIFT button

See page 27 for details.

ZOOM buttons

Press the ZOOM buttons on the remote control to zoom in and out

the image.

FOCUS buttons

Press the FOCUS buttons on the remote control to adjust focus of

the image.

INFO . button

Information display can be used to confirm the current operating

condition of the projector and the signal being projected through

the projector.

Press the INFO. button on the remote control to display the

information window on the screen. To hide the information

window, press the INFO. button again.

The information window can also be selected from the

menu.

Note:



• The H-sync freq. and V-sync freq. values described in the

figure may be different from the actual values.

• SERIAL NO. is used to service the projector.

Downloaded From projector-manual.com Sanyo Manuals