Mode Free - Sanyo PLC-XM100 Owner's Manual

Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select yes. All
adjustments will return to their previous figures.

Mode free

To clear the stored data, select Mode free and then press the Point
► or the SELECT button. Move the highlight to the Mode that you
want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the Point
► or the SELECT button. Move the highlight to one of the Modes
1 to 10 in which you want to store, and then press the SELECT
button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.36).
• When input computer signal to the projector, PC adjust function
will become available.
Downloaded From projector-manual.com Sanyo Manuals
Mode free
Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Values of Total dots, Position H,
Position V, Display area H and
Display area V.
Store
Store
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Press the MENU button
to close this dialog box.
Computer Input
0
1366
0
0
0
1024
768
This mode has stored
parameters.
Where to free?
Total dots 1344
0
Position H 255
Position V 0 34
Display area H 1024
Display area V 768
Press the SELECT
button to clear the
stored data.
Vacant
Where to store?
store?
Free
Total dots
Total dots 1344
Position H 0
0
Position H 255
0
Position V
Position V 0 34
Display area H
Display area H 1024
Display area V
Display area V 768
Press the SELECT button to
store the data.
9