Video Input; Video System Selection - Sanyo PLC-XM100 Owner's Manual

1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Input and then press the Point
► or the SELECT button.

Use the Point ▲▼ buttons to select Video, S-video or Computer
1(Component) and then press the SELECT button.

Use the Point ▲▼ buttons to select System and then press
the Point ► or the SELECT button. Use the Point ▲▼ buttons
to select the desired system and then press the SELECT
button.
Video jack or S-video jack
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4 .4, PAL-M, and PAL-N.
y, Pb/Cb, Pr/Cr jacks
Auto
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 105i or 100i, select the system
manually.
y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 40i, 575i,
40p, 575p, 70p, 105i, 100i, and 100p.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Downloaded From projector-manual.com Sanyo Manuals

Video Input

Video System Selection

AV System Menu (Video or S-video)
Input 1
Input 2
Input 3
System
AV System Menu (y, Pb/Cb, Pr/Cr)
Input 1
Input 2
Input 3
System
1080p
1080i
1035i
720p
575p
480p
575i
480i
RGB(PC analog)
RGB
Video
NTSC
Video
RGB(PC analog)
RGB
Y, Pb/Cb, Pr/Cr
Auto
Y, Pb/Cb, Pr/Cr
45