Connect An Ethernet-Enabled Device - NETGEAR EX6150 AC1200 Quick Start Manual

Connect an Ethernet-Enabled Device

After the extender is connected to your existing WiFi network, you can
connect a wired device to the extender using an Ethernet cable. That
device can then access your existing network through the WiFi connection.
WiFi router
1. Set up the extender.
For more information, see
.
5
2. Connect the extender to an existing WiFi network.
For more information, see
.
page 6
3. Plug the Ethernet cable from an Ethernet-enabled device in to the
Ethernet port on the extender.
Extender
Place the Extender and Apply Power
Connect to an Existing WiFi Network
12
Blu-ray player
on page
on