Use The Extender In Extender Mode; Place The Extender And Apply Power - NETGEAR EX6150 AC1200 Quick Start Manual

Use the Extender in Extender Mode

Set the Access Point/Extender switch, place the extender, apply power,
and connect it to your WiFi network.
Set the Access Point/Extender Switch
To use the extender in extender mode, set the Access Point/Extender
switch to Extender

Place the Extender and Apply Power

1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup
process.
2. Plug the extender into an electrical outlet.
Wait for the Power LED
does not light, press the Power On/Off button on the side of the
extender.
.
to light green. If the Power LED
5