Removal Of Paper Feed Motor; Removal Of Paper End Sensor - Epson LX-HOO Technical Manual

REV.-A
4.2.5.2 Removal of Paper Feed Motor (Figure 4-17)
1. Remove the printer mechanism. (Refer to Section 4.2.4)
2. Disconnect the motor cable from the paper feed motor.
3. Loosen the tab of the frame, which secures the paper feed motor to the frame, by pushing it using
a screwdriver, and remove the paper feed motor by turning it in the direction shown by the arrow
below, using point A as a fulcrum.
I
(Viewed from upward)
4.2.5.3 Removal of Paper End Sensor (Figure 4-18)
Remove the platen unit and paper guide. (Refer to Section 4.2.4.1)
2. Loosen the tab securing the paper end sensor to the paper guide, remove the paper end sensor by
turning it in the direction shown by the arrow below, using point A as a fulcrum.
\
Paper Feed Motor
Fig. 4-17. Removal of Paper Feed Motor
Notch
(Cross section of Paper Guide)
Fig. 4-18. Removal of Paper End Sensor
(Viewed from left side)
4-12