Disassembly Of Tractor Unit - Epson LX-HOO Technical Manual

REV.-A
4.2.5.9 Disassembly of Tractor Unit (Figures 4-29 through 4-32)
Loosen the three tabs of the sprocket mounting plate using a screwdriver and remove the side cover.
(Both the left and right side covers can be removed at the same time.)
Sprocket
Mounting
Plate (R)
2. Remove the sprocket gear and the sprocket transmission gear.
3. Remove the shaft holder. (Refer to Figure 4-8. The left and right shaft holders can be removed at
the same time.) Remove the sprocket shaft from the sprocket mounting plate.
4.
Loosen the sprocket mounting plate tab using a screwdriver, and pull out the sprocket guide shaft.
Push
Transmission Gear
Fig. 4-29. Removal of Side Cover
Fig. 4-30. Removal of Sprocket Guide Shaft
4-18
Side Cover (R)
Sprocket Guide
Shaft